GT-R PERFORMANCE – Jotech Motorsports

GT-R PERFORMANCE PACKAGES

NEED MORE POWER?

CHOOSE PACKAGE BELOW

STAGE 1

620 HORSEPOWER

Our Stage 1 Power Package for the Nissan GT-R R35 offers the most possible performance for the least possible impact on your wallet. This is the perfect introduction into modifying your GT-R, and will put you at 620HP (510whp)! Pricing is parts & and labor included!

EXHAUST SYSTEM

HKS Stainless Non-Resonated Mid Section(Add $200 for Resonated Mid Section)
HKS Drop-in Dual Air Filters (Add $650.00 for 2.75″ Air Intake System)
HKS Legamax Stainless Exhaust System (Other Models / Brands Available)

ENGINE MANAGEMENT SYSTEMS

Cobb Access Port V3 w/TCM Capabilities
Labor For Installation & Custom Jotech Motorsports Calibration Dyno Tune

YOUR PRICE // PARTS AND LABOR INCLUDED:

$4,995

(+ $200 for 15-17 R35)

STAGE 2

740 HORSEPOWER

Our most popular package is the Stage 2 package at 740HP (600-620whp) which will unleash the full potential of the stock GT-R engine / turbochargers. A safe, reliable and repeatable performance that will deliver that exhilarating feeling that you’re looking for. Our custom tune will give you the ability to raise or lower your power levels with map switching capabilities from the convenience of your existing cruise control switches.

This package will come complete with everything you see in Stage 1 plus bigger injectors (1000cc), upgraded twin fuel pumps, 3″ dual air intake system, stainless complete exhaust system and iridium colder spark plugs to make everything run efficient and safe. Pricing is parts & labor included!

EXHAUST & INTAKE SYSTEM

HKS or Greddy Stainless Non-Resonated Mid Section (Add $200 for Resonated Mid Section)
HKS LEGAMAX Stainless Complete Exhaust System
(Optional Greddy 94mm Titanium Full Exhaust w/ Titanium Midpipe. (Add $1300.00) *Recommended*
3″ Polished / Black Powder Coated Aluminum Air Intakes w/ K & N Filters

ENGINE MANAGEMENT SYSTEMS

Cobb Access Port V3 w/TCM Capabilities
Labor For Installation & Custom Jotech Motorsports Calibration Dyno Tune

FUEL MANAGEMENT SYSTEMS

Upgraded Fuel Injectors (ID 1,000cc w/PNP Harness)
HKS Twin Fuel Pumps Upgrade
HKS Iridium Colder Spark Plugs
E85 Tune / 93 Octane Tune

Optional Ethanol Flex-Tune Available – Add $1100 For Ethanol Flex-Kit / Install & FlexTune. Please Call For More Info

YOUR PRICE // PARTS AND LABOR INCLUDED:

$10,250

STAGE 2 FLEX

740 HORSEPOWER

This is our Stage 2 package with Flex-Fuel (E85) Tune capability and the convenience of 1 map that will make 740HP (600-620whp) which will unleash the full potential of the stock GTR engine / turbochargers. A safe, reliable and repeatable performance that will deliver that exhilarating feeling that you’re looking for. Our custom tune will give you the ability to raise or lower your power levels with map switching capabilities from the convenience of your existing cruise control switches.

This package will come complete with everything you see in Stage 1 plus bigger injectors (1000cc), upgraded twin fuel pumps, 3″ dual air intake system, stainless exhaust system and iridium colder spark plugs to make everything run efficient and safe. Pricing is parts and labor included!

EXHAUST & INTAKE SYSTEM

HKS or Greddy Stainless Non-Resonated Mid Section(Add $200 for Resonated Mid Section)
HKS LEGAMAX Stainless Complete Exhaust System
(Optional Greddy 94mm Titanium Full Exhaust w/ Titanium Midpipe. (Add $1300.00) *Recommended*
3″ Polished / Black Powder Coated Aluminum Air Intakes w/ K & N Filters

ENGINE MANAGEMENT SYSTEMS

Cobb Access Port V3 w/TCM Capabilities
Labor For Installation & Custom Jotech Motorsports Calibration Dyno Tune

FUEL MANAGEMENT SYSTEMS

Upgraded Fuel Injectors (ID 1,000cc w/PNP Harness)
DW Twin Fuel Pumps Upgrade
HKS Iridium Colder Spark Plugs
93 Octane Tune | E85 Flex-Fuel Tune Included

JOTECH FLEX FUEL KIT PACKAGE

Zeitronix ECA
Custom Lines
Installation
Flex Fuel Tune
Includes E85/E98 Tune

YOUR PRICE // PARTS AND LABOR INCLUDED:

$11,750

STAGE 3

880 HORSEPOWER

Our Stage 3 package will utilize some of the best bolt-on turbo kits and intercooler kits featuring Alpha, Boost Logic, ETS, Greddy or HKS of your choice. These kits comes complete with intercooler piping, blow-off valves and all fittings and all turbocharging hardware included. Custom tuning is done via ECUTEK or Cobb AccessPort V3 with TCM capability. Flex-Fuel is optional for those who wants the ease of running E85/E98 mix with your 93OCT for more power delivery.

Your GT-R’s fuel system will also be upgraded with ID1,300CC Injectors (1700cc / 2600cc Optional), HKS twin fuel pumps (Alpha Brushless Pumps Optional), and HKS Iridium Colder Spark Plugs. You can expect your wheel horsepower to be at 680-700WHP on 93OCT. Power production is limited to 750WHP max to maintain stock engine reliability. Pricing is parts and labor included!

EXHAUST & INTAKE SYSTEM HKS Stainless Non-Resonated Mid Section (Add $200 for Resonated Mid Section)
HKS LEGAMAX Stainless Exhaust System (Tig Welded)
(Optional Greddy 94mm Titanium Full Exhaust w/ Titanium Mid Section. (Add $1300.00)
3″ Polished Or Black Powder Coated Aluminum Air Intakes w/ K&N Filters

ENGINE MODIFICATIONS

Alpha Twin Turbo Kit – OR – Boost Logic | ETS | HKS GT800 Twin Turbo Kit | GReddy Twin Turbo Kit

Alpha Twin Turbo Kit – OR – Boost Logic | ETS | HKS GT800 Twin Turbo Kit | GReddy Front Mount Intercooler Kit including Piping Kit
Fuel Monitoring Sensor Kit | Speed Density Sensor Kit

** Custom Fab Intercooler Piping w/ Vanjen Quick Release Clamps are Optional **

All Fluids

ENGINE MANAGEMENT SYSTEMS

ECUTEK – OR – Cobb Access Port V3 w/TCM Capabilities (Motec is Optional)

Labor For Installation & Custom Jotech Motorsports Calibration Dyno Tune

FUEL MANAGEMENT SYSTEMS

Upgraded Fuel Injectors (ID 1,300cc w/PNP Harness)
DW Twin Fuel Pumps Upgrade
HKS Iridium Colder Spark Plugs
93 Octane | E85 Flex-Fuel Tune

CLUTCH UPGRADE RECOMMENDED FOR GT-R WITH HIGHER MILEAGE

YOUR PRICE // PARTS AND LABOR INCLUDED:

$29,000 – $31,000

STAGE 4

1,000 – 1,100 HORSEPOWER

This is our Stage 4 package that can make up to 1,000 WHP on a budget with our Jotech 3.8L fully-built engine and also equipped with The “ONE-K” built transmission by Sheptrans as described below. We equip your GT-R with one of the best bolt-on turbo kits available from ETS, HKS, GReddy or Alpha along with some of the best intercooler kit from ETS Race / AMS Race, Greddy XL or HKS. All turbo kits will come complete with all hardware and lines for perfect fitment. Jotech custom tuning is done via Cobb AccessPort V3 with TCM capability.

Your GT-R’s fuel system will also be upgraded with 1,300CC / 1700cc or 2,000cc Injectors depending on power/fuel demands. Fuel delivery consist of Alpha Single OR Dual Brushless Fuel pumps (pricing will varies) with adjustable fuel pressure regulator, fuel gauge, fuel monitoring system and HKS Iridium Colder Spark Plugs. You can expect your horsepower to be at 900HP on 93 OCT and 1,000HP+ on Race Gas. Pricing is parts & labor included!

EXHAUST & INTAKE SYSTEM

ETS 4″ Stainless Steel Complete Exhaust System
3″ Polished Or Black Aluminum Air Intakes w/ K & N Filters

ENGINE MODIFICATIONS

Jotech Motorsports 3.8L Fully-Built Motor
Custom Big Bore Dry-Sleeves Machined Bore & Honed
Arias Coated Forged Pistons Pauter Billet Connecting Rods
Blueprinted & Balanced Ferrea Stainless Steel Valves
Ferrea Titanium Retainers Ferrea Dual Valve Springs
Ferrea Locators & Keepers Tomei Camshafts
ARP Headstuds & MainStuds
R35 Oil Pump
R35 Water Pump Rod Bearings
Main Bearings
Complete Gasket & O-Ring Set Removal & Installation
Transfer of all Turbo Components and Accessories

Tial Blow-Off Valves

*** Custom Fab Intercooler Piping w/ Vanjen Quick Release Clamps are Optional ***

*** DCT Transmission Oil Cooler (HKS — OR — GReddy) are Optional ***
All Fluids

DRIVETRAIN UPGRADES

The “ONE-K” Transmission Upgrade Built by ShepTrans
PPG V 2.1 Nissan GTR R35 6spd H/C Synchro Set
ShepTrans/Dodson 18 plate clutch
Dodson Forged A/ B baskets
Dodson Piston shaft seals
Dodson FWD retainer
Dodson Mechanical lock #1, #2
Dodson O-ring and seal upgrade kit
Dodson Oil pump shaft upgrade with blueprint
Dodson Output shaft end float shim
Dodson 1,2,3,4,5,6 Thrust bearing cir clip
Dodson Selector Piston Shims x 4
6 neodymium magnets
Dodson High temp rear differential oil seal
Dodson Stainless re-usable internal filter
OEM Fwd output seal
OEM Rear Differential Axle Seals
Oem Nissan transmission and rear differential drain plug gasket
Oem Nissan transmission and Rear differential fill plug gasket
All fluids

ENGINE MANAGEMENT SYSTEMS

ECUTEK – OR – Cobb Access Port V3 w/TCM Capabilities
Labor For Installation & Custom Jotech Motorsports Calibration Dyno Tune

FUEL MANAGEMENT SYSTEMS

Upgraded Fuel Injectors (ID 1,300CC / 1700cc or 2,000cc w/PNP Harness)
Alpha Single OR Dual Brushless Fuel Pumps (Pricing will Varies)
Alpha Billet Fuel Rail Kit
Adjustable Fuel Pressure Regulator
Fuel Pressure Guage & Monitoring System
HKS Iridium Colder Spark Plugs
E85 Tune / 93 Octane Tune / C16 Race Gas Tune

Optional Ethanol Flex-Tune Available – Add $1500 For Ethanol Flex-Kit / Install & FlexTune. Please Call For More Info.

YOUR PRICE // PARTS AND LABOR INCLUDED:

$62,500 – $72,000+

STAGE 5

1,200 – 1,300 HORSEPOWER

This is a mind-blowing street car package, the Jotech Stage 5. With a Jotech 3.8L built-engine (4.1 / 4.3L Stroker Engine is optional) and Sheptrans Stage 4 built-transmission. Utilizing one of the best bolt-on turbo kits available from ETS, Alpha, Boost Logic, HKS or GReddy along with some the best intercooler kits on the market like ETS, AMS , Greddy or HKS Intercooler Kit. All turbo kits will come complete with all hardware and components for perfect fitment. Jotech custom calibration tuning is done via ECUTEK, Cobb AccessPort V3 or Motec M150 System.

Your GT-R’s fuel system will also be upgraded with custom fuel delivery system with Alpha Dual Brushless fuel pumps system, billet fuel rails, adjustable fuel pressure regulator, fuel pressure gauge and fuel pressure monitoring system. Injector Dynamics 1,700cc OR 2,600CC Injectors depending on power and fuel demands. HKS Iridium Colder Spark Plugs. You can expect your horsepower to be at 1,000HP on 93 OCT and 1,000-1,200HP on E85 / E98 or C16 Race Gas. Pricing is parts & labor included!

EXHAUST & INTAKE SYSTEM

ETS 4″ Stainless Steel Complete Exhaust System
3″ – OR – 3.5″ Polished Or Black Aluminum Air Intakes w/ K & N Filters

ENGINE MODIFICATIONS

Jotech Motorsports 3.8 Liter Fully-Built Motor (Add $8,000 for 4.1 Liter Stroker Engine)
Custom Big Bore Dry-Sleeves Machined Bore & Honed
Arias OR CP Forged Pistons Pauter Billet Connecting Rods
Blueprinted & Balanced Ferrea Stainless Steel Valves
Ferrea Titanium Retainers Ferrea Dual Valve Springs
Ferrea Locators & Keepers Jotech Spec Camshafts (Jotech CNC Heads optional)
ARP Headstuds & Main Studs
Oil Pump
Water Pump Rod Bearings
Main Bearings
Complete Gasket & O-Ring Set Removal & Installation
Transfer of all Turbo Components and Accessories

Tial Blow-Off Valves

*** Custom Fab Intercooler Piping w/ Vanjen Quick Release Clamps are Optional ***

*** DCT Transmission Oil Cooler (HKS — OR — GReddy) are Optional ***

All Fluids

DRIVETRAIN UPGRADES

Sheptrans Stage 4
PPG V 2.1 Nissan GTR R35 6spd H/C Synchro Set
Dodson Pro Max clutch/Alloy version ( Sheptrans spec )
Dodson Heavy Duty clutch return spring seals x 2
Dodson Heavy Duty clutch return spring retaining clips
Dodson Piston shaft seals
Dodson FWD retainer
Dodson Mechanical lock #1,#2
Dodson Selector Piston Shims x 4
Dodson O-ring and seal upgrade kit
Dodson Oil pump shaft upgrade with blueprint
Dodson Reusable transmission filter, 6 neodymium magnets
Dodson High temp rear differential oil seal
ShepTrans FWD ball retainer
Dodson FWD clutch Fluid
Dodson Fwd output seal
DodsonOutput shaft end float shim
Dodson 2,4,6 Thrust bearing circlip
Dodson 1,3,5 Thrust bearing circlip
Oem Nissan transmission pan gasket
Transmission and Rear differential Fill plug gasket (2)
Rear differential drain plug washer x1
Oem Nissan Rear differential side seals
T1 rear diff brace
Arp Rear diff bolt upgrade
Dodson Surge/Baffle kit
Sealer/Loctite

Optional: Dodson Rear Reduction Gear | PPG Front Billet Transfer Gear Set | Sheptrans Billet Thrust Plate (Recommended for Drag Race Application – Add $3,400.00)

ENGINE MANAGEMENT SYSTEMS

ECUTEK | Cobb Access Port V3 | Motec M150 Engine Management System

Labor For Installation & Custom Jotech Motorsports Calibration Dyno Tune

FUEL MANAGEMENT SYSTEMS

Upgraded Fuel Injectors (ID 1,700cc or 2,000cc w/PNP Harness)
Alpha Dual Brushless Fuel Pumps System
Alpha Billet Fuel Rail Kit
Adjustable Fuel Pressure Regulator
Fuel Pressure Guage & Monitoring System
HKS Iridium Colder Spark Plugs
E85 Tune / 93 Octane Tune / C16 Race Gas Tune

OPTIONAL MODIFICATIONS

Wheel and Tire Package
Carbon Fiber Body Panels
Racing Brakes Carbon Ceramic Brakes w/ Upgraded Big Brake Calipers
Chromoly Roll Bars or Cage Available
Please contact us for full options

YOUR PRICE // PARTS AND LABOR INCLUDED:

$88,000+

STAGE 6

1,400 – 1,600 HORSEPOWER

This is our favorite package due to the fact that you have all the necessary parts to make a Stage 6-S (Street) GTR 1,300HP – 1,400HP. For Stage 6+ (Race) Package 1,500HP – 1,700HP. Imagine a GTR with this much power that you could actually drive everyday. Please call for more info! This package will come with our formidable Jotech 3.8, 4.1 or 4.3L Stroker fully-built engine. A Stage 4 ShepTrans (Stage 5/6 Optional) fully-built transmission as described below. Utilizing one of the best bolt-on turbo kits available from ETS, Alpha, Boost Logic Kits Twin Turbo Kits along with some of the best intercooler kits on the market. For this Stage 6 Package, we exclusively use and recommend Motec M150 Engine Management System.

Your GT-R’s fuel system will also be upgraded with custom fuel delivery system with Alpha Dual Brushless Fuel Pumps, Billet fuel rails, adjustable fuel pressure regulator, gauge and fuel pressure monitoring system. 1700cc OR 2,600CC Injectors depends on power level/fuel demands. HKS Iridium Colder Spark Plugs. You can expect your horsepower to be at 1,050HP on 93 OCT and 1,300-1,600HP on E85/E98 or C16 Race Gas (HP will varies depending on turbo kit. Pricing is parts & labor included!

EXHAUST & INTAKE SYSTEM

ETS 4″ Stainless Steel Complete Exhaust System
3.5″ – OR – 4″ Polished or Black Powder Coated Aluminum Air Intakes w/ K & N Filters

ENGINE MODIFICATIONS

Jotech Motorsports 3.8 Liter Fully-Built Motor (Add $8000 for a 4.1-4.3L Liter Stroker Engine)
Custom Big Bore Dry-Sleeves Machined Bore & Honed
Arias
Manley
CP Forged Pistons Pauter or Carrillo Billet Connecting Rods
Blueprinted & Balanced Ferrea Stainless Steel Valves
Ferrea Titanium Retainers Ferrea Dual Valve Springs
Ferrea Locators & Keepers Jotech Spec Camshafts (Jotech CNC Heads Optional)
ARP Headstuds & Mainstuds
Oil Pump
Water Pump Rod Bearings
Main Bearings
Complete Gasket & O-Ring Set Removal & Installation
Transfer of all Turbo Components and Accessories

Tial Blow-Off Valves

*** Custom Fab Intercooler Piping w/ Vanjen Quick Release Clamps are Optional ***

*** DCT Transmission Oil Cooler (HKS — OR — GReddy) are Optional ***

DRIVETRAIN UPGRADES

Sheptrans Stage 4 (Stage 5 Optional – Add $8,300)
PPG V 2.1 Nissan GTR R35 6spd H/C Synchro Set
Dodson Pro Max clutch/Alloy version ( Sheptrans spec )
Dodson Heavy Duty clutch return spring seals x 2
Dodson Heavy Duty clutch return spring retaining clips
Dodson Piston shaft seals
Dodson FWD retainer
Dodson Mechanical lock #1,#2
Dodson Selector Piston Shims x 4
Dodson O-ring and seal upgrade kit
Dodson Oil pump shaft upgrade with blueprint
Dodson Reusable transmission filter, 6 neodymium magnets
Dodson High temp rear differential oil seal
ShepTrans FWD ball retainer
Dodson FWD clutch Fluid
Dodson Fwd output seal
DodsonOutput shaft end float shim
Dodson 2,4,6 Thrust bearing circlip
Dodson 1,3,5 Thrust bearing circlip
Oem Nissan transmission pan gasket
Transmission and Rear differential Fill plug gasket (2)
Rear differential drain plug washer x1
Oem Nissan Rear differential side seals
T1 rear diff brace
Arp Rear diff bolt upgrade
Dodson Surge/Baffle kit
Sealer/Loctite
Motul 75/140 FF

Optional: Dodson Rear Reduction Gear | PPG Front Billet Transfer Gear Set | Sheptrans Billet Thrust Plate (Recommended for Drag Race Application – Add $3,400.00)